How to wall-mount your TV (and why you probably should)

There is no better way to raise your living room by lifting this large TV from a holder and on the wall. The installation of the wall may seem hard, but if your space allows you, you can restore valuable properties at your entertainment center and help your living area feel more open and identity. It will also be a benefit from keeping your precious TV out of reach of children or amazing pets

All it takes is some basic tools, a little labor, and a friend to help lift larger TVs. Here’s all you need to prepare yourself.

TV wall pregnant women are a commodity element these days, so there are all kinds of similar appearance models of all kinds of brands. Amazon is mired with options and even Amazon Basics sells some.

The first thing you want to search for is the size of the TV that is classified for it, and how much weight it can carry. Check the technical specifications of the accurate TV model, and make sure you are in the mountain range.

You should also check the scaling of your TV, and ensure the compatibility of the wall. The sizes of the Vesa Mountain correspond to the distance between the tuber conductor holes at the back of the TV.

Another important thing that must be observed is that if the wall installation is fixed, or simply tends, or it contains a complete clarification of the movement, allowing it to get out of the wall. Fixed and basic till models may be simpler and more stable, but I can’t emphasize enough about the appropriateness of being able to pull the TV away from the wall on the tuning arm. It makes separating any cables and connecting them to the back of the TV is much easier. When I had a basic tilt rope for 70 -inch TV, it could be a two -person HDMI modification modification of two people, because we had to lift the TV from the wall to reach the ports.

When I recently installed the LG C3 OLED 77 -inch TV, I went with this joint model by USX. Its classification was required – for 86 -inch TVs and 132 ribbons – more than enough to cover Baladi TV, which weighs less than half of that at 51.8 pounds. I was not aware of USX before buying it, but I seized the opportunity and was completely good. You have also faced positive experiences with pregnant women and accessories from Mount-IT.

You will usually need exercises, screwdriver, bubble level, nail discoverer, and pencil. The wall holder may come with the primary screwdriver, a ten -legged key or small keys – perhaps even the level of a small bubble.

The wall holders usually contain two vertical strips hanging on the TV through the Vesa screw holes, allowing the TV to hang on the bow as soon as it is installed. These bars usually contain many escalating holes, to accommodate different sizes of TVs. Put your TV on a flat surface, and install the bars on its back according to the included instructions.

Measurement, measurement, measurement

Most wall pregnant women come with a paper template that shows the impression of the installation bow. You will need to use this or the bow itself to frame where you will go. To capture the perfect site for installing it on your wall, you must calculate your TV size and how high or decrease on your wall. Keep in mind that you want your TV to be around the eye level, although it cannot absorb every space easily the perfect height. Make sure to sit actually where you will see where you should go to the location of your TV, and try not to withdraw any R/Tvtohight crimes.

Find the dimensions of TV from its technical specifications and use it to measure the perfect installation site on the wall. You will then have to measure the distance between the top of the TV to the place where the vertical bars will be attached to the bow. This will give you an idea of ​​how height will have to install the bow on the wall. Put this height on the wall with a pencil.

Now that you have an idea of ​​where the bow will go, you can seize the screw discover and draw your wall buttons map. Equalizing the bow to a strong wall nail is essential when installing heavy objects, because drywall alone is not strong enough to carry such a pregnancy safely. The horizontal location of the arch has a small time, as the TV does not have to stick to the arc center. We hope you have a wall nail that corresponds to one of the screw holes in the bow – if not, I will explain how to deal with it in the next section. Use the bubble level to settle the bow or mold on the wall where it should go, and mark the screw holes on the wall.

To install the bow on the wall appointment on the wall, you will have to dig some experimental holes for nails. The guidelines should tell you the extent of experimental holes. The difficult part is what to do if a single side of the bolts is not lined with a nail.

You will want to use the wall mark or switch the screws for any screws that do not enter the buttons, because installing the TV is likely to cause it out of the wall and fall. To ensure that my brackets can keep safely the weight of my TV, although not lining up with the canaches of the walls, I used a switching screw. (There are a lot of other brands as well, and you can easily find them in hardware stores.) The sizes of switching nails or anchors that you need to use on the bolts embracing with your bow.

Quickly aside: Switching the screws is great, and I used it to hang things like the sound bar on the different TV and the shelves around my house that did not line up with the wall studs. Just be aware that they need to dig an experimental hole larger than average, so be sure to get your measurements.

Now dig your experimental holes, place in any necessary vessels or switch the screws, and record the bow on the wall.

This is actually the easiest part, provided that you have a friend to help you. But it is also one of the most tired. team Team Teven to the Sagittarius. Once it is suspended, there is usually a small or similar way to lock the bottom of the vertical television strips to the bottom of the bow. This additional part of safety is vital, because without it the TV flows through gravity and not fully guaranteed. If the TV is very high or very low on the bow, you should be able to take it off and adjust the vertical bars at the back to get it in the perfect place.

If you choose a mountain of tilt or clarification, this is the time when you will have to tamper with it according to the instructions guaranteed to ensure that the TV is a level. Also, if your TV is large or slightly installed above the eye level, you can tilt it down a little bit towards you.

Now enjoy this beautiful TV on your wall.

Another thing: cable management

Well, I know that you have finished and every proud of yourself (you must be), but there is an additional step that you should consider creating a wall -fixed TV setting looks best in the matter: Neaten Up UP Your Cables.

There is a variety of ways where you can do this. For example, you can use Hides Cable Hides or RaceWays, cut holes and get out of the wall behind the TV and install the cable bridge to completely hide the cables (you will need some long cables). Whether you choose something simple or advanced, any Cable management is better than just letting the wires hangs and decreases wherever they are. I did this hard to install your TV, so why don’t you go to an additional mile and make the space look more clear?